Malfunctions And Return Instructions; Malfunctions - Brainlab CURVE DUAL System User's Manual

SYSTEM OVERVIEW
2.6

Malfunctions and Return Instructions

2.6.1

Malfunctions

System Damage or Do not continue to use the system if:
Failure
• The mains power cable or plug is damaged or frayed
• Liquid has been spilled into the device
• The system does not operate normally when operating instructions are followed
• A cart has tipped over or cover has been damaged
• System components exhibit a distinct decrease in performance, indicating need for servicing
• Liquids leak from system
• System emits smoke
• The LEDs indicate an error
How to Respond to
Damage or Failure
Steps
System User Guide Rev. 1.0 Curve Dual Display, Curve Single Display Ver. 1.0
If a error message appears on the touchscreen(s) or if the error LEDs are lit (see
page 56 and page 86), contact Brainlab support. Do not use the system.
1. Turn off system.
2. Unplug system from wall outlet.
NOTE: If applicable, unplug the mains power cable from the Camera Cart - Curve Dual
Display.
3. Contact Brainlab support.
4. Attach a notice such as "DO NOT USE" to equipment to prevent it from being used
inadvertently.
If you continue to use equipment that has been found to be defective during an inspec-
tion, you risk causing injury to the patient.
33