Brainlab CURVE DUAL System User's Manual page 103

TRANSPORT
How to Apply
Protection Cover to
Camera
Steps
System User Guide Rev. 1.0 Curve Dual Display, Curve Single Display Ver. 1.0
a
1. Ensure that Camera Cart is secured in parking position (see page 104) and the camera
is turned off and completely cooled down.
2. Pull camera protection cover
3. Secure camera to the camera post using the protection cover velcro strap
NOTE: To complete this step, the Camera Cart must be in transport/storage position (see
starting at page 107).
Camera must be secured with the protection cover strap to prevent unintentional
movement during transport.
To avoid overheating, ensure that the camera has been turned off for at least five min-
utes before applying the protection cover.
Figure 48
a over the camera.
s
s .
103