Brainlab CURVE DUAL System User's Manual page 72

Camera Use
Careful Handling
Damages and
Cleanliness
Air Flow
Turning the Camera When the Camera Cart is connecting via cable to the Monitor Cart, the Camera Cart is powered
On on as soon as the Monitor Cart is turned on (see page 89).
When using wireless communication with the Curve Dual Display, the camera mains power must
be plugged in and turned on (see page 70).
Warm-up Time Every time camera is powered on, it generally requires a warm-up time of two minutes. If camera is
stored at low temperatures, warm-up time may be longer.
NOTE: Wireless camera communication can be established even when the camera is still warming
up.
72
The camera is a highly sensitive optical device. Handle it with care.
Always inspect the camera for cleanliness and possible damage before the procedure.
Do not use the camera if it is damaged or if there are any scratches on the inner ring
of the lenses.
Do not use Camera Cart if it does not steadily hold the camera in position.
Do not use camera if illuminator filter or lenses are dirty.
Do not obstruct normal air flow around the camera, e.g., by draping. Doing so could
affect the camera's operational environment beyond its recommended thresholds. Do
not attempt to protect or cover the camera with methods unapproved by Brainlab.
System User Guide Rev. 1.0 Curve Dual Display, Curve Single Display Ver. 1.0