Transporting The System; Overview - Brainlab CURVE DUAL System User's Manual

Transporting the System

6.4 Transporting the System
6.4.1

Overview

Before You Begin
Avoid Vibrations
Flat Surface
Unintentional
Movement
112
Only move the carts when they are in the secure transport position (see page 104).
Ensure that all screwable locks on the monitor arms are securely locked.
Open all brakes before moving the system Do not attempt to move Monitor Cart or
Camera Cart when the wheels are locked, otherwise carts could tip.
Slowly move the Monitor Cart and Camera Cart back and forth to ensure that they are
securely docked together (see page 111).
Ensure that the intended path is clear of obstructions. Avoid door steps or objects that
may be lying on floor. Do not run over system cables during transport.
Avoid vibrations and shocks during moving and storage.
Do not move system when it is switched on. Exposing the system to strong vibrations
or impacts could cause damage and result in an irreversible loss of data.
Never transport the system on a surface with >10° tilt. The transport speed of the
docked system will increase on tilted surfaces. Tilted surfaces may cause the system
to tip over.
When moving the Camera Cart, be aware that the suspended arm may move uninten-
tionally.
System User Guide Rev. 1.0 Curve Dual Display, Curve Single Display Ver. 1.0