Transporting the System
6.4.2
Proper Transport Procedure
How to Transport
the System
Step
Pull the docked system by the handle
How to Overcome
If a clear, flat path is unavailable (e.g., an unavoidable depth variation between rooms), follow the
Obstructions
below procedure to overcome this obstruction.
During Transport
NOTE: Procedure is applicable for depth variations of 8 mm-20 mm.
Steps
114
1.
Keeping the carts in transport position, undock Monitor and Camera Carts (see
page 110) so they can be moved individually.
2.
Pull the Camera Cart to the point of depth variation, then carefully lift the handle while
pulling it over the step.
NOTE: Be careful not to lift the cart so much that it tips over.
3.
Pull the Monitor Cart to the point of depth variation, then carefully lift the handle while
pulling it over the step.
NOTE: Be careful not to lift the cart so much that it tips over.
4.
Re-dock carts (see page 110) before continuing with transportation.
System User Guide Rev. 1.0 Curve Dual Display, Curve Single Display Ver. 1.0
Figure 54
.
a
a