Docking Camera And Monitor Carts; Before You Begin - Brainlab CURVE DUAL System User's Manual

TRANSPORT
6.3

Docking Camera and Monitor Carts

6.3.1

Before You Begin

General The monitor and camera protection covers must be used during docking, transport and storage to
Information protect the sensitive components from damage.
Monitor Cover
(Front)
System User Guide Rev. 1.0 Curve Dual Display, Curve Single Display Ver. 1.0
To avoid damage, place protection covers over monitor(s) and camera before docking,
transport or storage.
Do not cover camera or monitors with protection covers when system is running. Oth-
erwise system could overheat and be seriously damaged. Ensure that system has
been turned off and is completely cooled down before applying the protection covers.
Disconnect camera from Monitor Cart.
Clean touchscreens before applying the monitor protection covers (see page 120).
Figure 46
101