Transport Layer Control - HikRobot CameraLink Area Scan Camera User Manual

Attribute
Device Control
Image Format
Control
Acquisition Control
Analog Control
LUT Control
Shading Correction
Counter And Timer
Control
Digital IO Control
Transport Layer
Control
User Set Control
For specific attributes, please refer to the actual one you got.

3.2.5 Transport Layer Control

The value of camera sensor geometry in the frame grabber software should be the same with that
of Device Tap Geometry in the MVS. Inconsistent parameters may lead to image exception.
You can go to Transport Layer Control > Device Tap Geometry to check or set the camera mode.
The CI Configuration in the MVS displays the mode that the camera adopts currently.
CameraLink Area Scan Camera·User Manual
Table 3-4 Attribute Description
Description
You can view camera information, edit its name and
reset the camera.
You can view and set the camera's resolution, image
reverse function, pixel format, region of interest, test
pattern, etc.
You can view and set the camera's acquisition mode,
frame rate, trigger mode, exposure time, etc.
You can view and set the camera's analog signal,
including gain, black level, Gamma correction,
sharpness, etc.
You can view the Look-Up Table (LUT) and set its index
and value.
You can set shading correction to correct shade.
You can set the function of Counter 0 as trigger source.
You can set the different input and output signals.
You can set the parameters of transport layer of the
camera.
You can save or load the camera's parameters. You can
set the default parameter when running the software.
14