Transport Layer Control - HikRobot CoaXPress User Manual

Loading parameters is available when connecting with camera, but without live view.
 Set User Default
You can also set default parameter by selecting parameter from drop-down list of User Set Default,
as shown below.

11.3 Transport Layer Control

You can go to Transport Layer Control attribute to view the camera's load size, tap configuration
mode, GenCP version, etc.
Parameter
Paylode Size
CoaXPress Area Scan Camera
Figure 11-3 Load User Set
Figure 11-4 Set User Default
Figure 11-5 Transport Layer Control
Table 11-2 Transport Layer Control Description
Read/Write
Read only
User Manual
·
Description
It is the camera's load size.
68