Configuring Groups - Extron electronics NetPA Ultra Series User Manual

Configuring Groups

To create a new group:
Select Tools > Configure Groups to open the Configure Groups dialog box.
1.
From the Select Group drop-down, select a group slot to configure (see figure 70,
2.
, on the previous page).
1
From the Select Control Type panel (
3.
4. Choose which gain stage the control type affects.
5. From the Available Group Members panel, select the channels to be configured as
group members (
6. Click Apply (
Figure 71.
Confirm the group number and name from the Confirm Group Details dialog box
7.
(see figure 71,
8. Click OK to confirm all details and create the group (
Figure 72.
To edit an existing group:
1. Select Tools > Configure Groups to open the Configure Groups dialog box (see
figure 73
From the Select Group drop-down list (
2.
3. From the Select Control Type panel (
4. Choose which gain stage to edit.
From the Available Group Members panel (
5.
members of the group.
Click Apply (
6.
7. From the Confirm Group Details dialog box, the group number and group name
can be edited (
).
3
).
4
1 2
Configure Groups Dialog Box
).
5
5
6
Confirm Group Details Dialog Box
on page 67).
).
4
).
5
NetPA U 2002 SB User Guide • Configurator Tools
), expand a control type.
2
3
4
).
6
), select an existing group to edit.
1
), expand a control type.
2
), select or deselect channels to be
3
66