Configuring Presets - Extron electronics NetPA Ultra Series User Manual

Mark Multiple Individual – Click the first item to mark it and press <Ctrl+Click> to
•
mark additional items anywhere in the main workspace.
Figure 67.

Configuring Presets

1.
Create a configuration to be saved as a preset (see
2. Mark the items to be included in the preset.
Select Tools > Presets > Save Preset.
3.
4. From the Save a Preset dialog box, enter the preset number (1 through 8) in the
Preset Number field (see figure 67,
assigned read [unassigned]. Enter a name into the Preset Name field (
character maximum).
Click OK (
5.
Figure 68.
NOTE: When a configuration file is pushed to a NetPA Ultra Series amplifier, presets
contained within that file are available for recall from DSP Configurator or SIS
commands.
The preset is saved and is available from the Presets drop-down list at the top of the
6.
main workspace.
Figure 69.
Marked Items Highlighted in Green
) to save the preset.
3
1
2
3
Save a Preset Dialog Box
Presets Drop-Down
NetPA U 2002 SB User Guide • Configurator Tools
Tools
on page 29).
1
). Preset slots that do not already have a preset
, 12
2
64