Configuring Groups - Extron electronics NetPA Ultra Series User Manual

Configuring Groups

To create a new group:
Select Tools > Configure Groups to open the Configure Group
1.
2. From the Select Group drop-down list, select a group slot to configure (see figure 71,
).
1
From the Select Control Type panel (
3.
4. Choose which gain stage the control type affects.
5. From the Available Group Members panel, select the channels to be configured as
group members (
6. Click Apply (
Figure 71.
Confirm the group number and name from the Confirm Group Details dialog box
7.
(see figure 72,
8. Click OK to confirm all details and create the group (
Figure 72.
).
3
).
4
1 2
Configure Groups Dialog Box
).
1
1 1 1
2 2 2
Confirm Group Details Dialog Box
), expand a control type.
2
3
4
).
2
NetPA Ultra Series • Configuration Tools
dialog box.
s
66