Related Manuals for Extron electronics P/2 DA2 MT
Summary of Contents for Extron electronics P/2 DA2 MT
- Page 1 User’s Guide P/2 DA2 MT Distribution Amplifier 68-435-01 B Printed in the USA 01 02...
-
Page 2: Installation And Operation
4 wood screws (see mounting template). Optional 3. Power on the P/2 DA2 MT. The LED will light amber when the power is on and will light green when the power is on and brackets are also available for vertical mounting (see mounting there is an input present. -
Page 3: Audio Connections
Warning! (high impedance) impedance or 600 ohms) No sleeve means NO CONNECTION. Wiring errors or plugging the audio connectors incorrectly may damage the audio output circuits. P/2 DA2 MT • Installation and Operation P/2 DA2 MT • Installation and Operation... -
Page 4: Specifications
THD + Noise ......... 0.03% @ 1 kHz at rated maximum output drive S/N ..........>90dB, balanced, at rated maximum output drive (21dB) Stereo channel separation ..>80dB @ 1 kHz P/2 DA2 MT • Installation and Operation P/2 DA2 MT • Installation and Operation... -
Page 5: Audio Input
CMRR ..........>75dB @ 20 Hz to 20 kHz Audio input Number/signal type ....1 stereo, unbalanced Connectors ........1 3.5 mm female stereo jack, 2-channel; tip (L), ring (R), sleeve (GND) Impedance ........>5 kohms unbalanced, DC coupled Maximum level ......+8.5dBu (unbalanced Audio output Number/signal type ....
Need help?
Do you have a question about the P/2 DA2 MT and is the answer not in the manual?
Questions and answers