Configuration Of Peripheral Devices Capable Of Qnacpu - Mitsubishi Q2ACPU User Manual

3. SYSTEM CONFIGURATION
3.1.2

Configuration of peripheral devices capable of QnACPU

(To RS-422 interface)
QnACPU
(Mounted to the
*3
base unit)
AJ71QC24 serial
communication module
(To RS-422 interface/RS-232C) *2
REMARK
AC30R4-PUS cable
AC20R4-A8PU cable
*2
RS-422
RS-422 cable
Option board Dedicated cable
RS-232C cable
*1 For details on the IC memory card reader/writer setting, refer to Operating Manual for the
peripheral device capable of GPP functions.
*2 For connection to RS-422 interface, use the RS-422
*3 When connecting the serial communication module and the peripheral devices capable of
GPP function, see User's Manual of the serial communication modules.
1. For details on the system configuration for each peripheral device, refer to
the Operating Manual for each.
2. QnACPU can connect a peripheral device capable of ACPU only when
accessing an ACPU in another station via a MELSECNET/10 or
MELSECNET data link. (However, QnACPU cannot be accessed. ) In this
case, set SW2 of system setting switch 2 on the CPU module ON.
Q6PU
programming unit
RS-232C
RS-232C cable
convertor
IBM-PC/AT-compatible
software package used:
(To option board slot)
IC memory card
reader/writer
*1
IBM-PC/AT-compatible
software package used:
3 - 2
RS-232C converter.