Table of Contents
Advertisement
Chapter 1. Programming Site Data
1.5 Entering System Data for the Channel
Channelx-System
The
submenu is used to enter system parameters for the channel. While following the programming
instructions, refer to Figure 28 on page 77.
1.5.1 Accessing the Channelx-System Submenu
1. In the Keypad Program, scroll to PROG and press [Enter].
2. In the PROG menu, scroll to CH1 or CH2 and press [Enter].
Channel PROGRAM
3. In the
4. Use the arrow keys to enter the desired Channel Label (up to 5 characters) and press [Enter].
5. Use the arrow keys to enter the desired Site/Channel Message (up to 21 characters) and press [Enter].
1.5.2 Selecting Volumetric Units
1. Scroll to the desired Volumetric Units for the flow rate display and press [Enter]. Available units are listed in
Table 1 below.
2. Scroll to the desired Volumetric Time units for the flow rate display and press [Enter].
3. Scroll to the desired number of Vol. Decimal Digits (digits to the right of the decimal point in the volumetric flow
rate display) and press [Enter].
1.5.3 Selecting Totalizer Units
1. Scroll to the desired Totalizer Units for the totalized flow rate display and press [Enter]. Available units are listed in
Table 1.
2. Scroll to the desired number of Tot Decimal Digits (digits to the right of the decimal point in the totalized flow rate
display) and press [Enter].
3. Do one of the following:
•
If MASS FLOW is ON, proceed to Selecting the Mass Flow Units on the following page.
If MASS FLOW is OFF, the meter returns to the Channel PROGRAM. Go to Procedure Options on page 5.
•
Note: To activate mass flow, refer to page 19.
6
SYSTM
menu, scroll to
Table 1: Available Volumetric/Totalizer Units
English
ACF = Actual Cubic Feet
KACF = Thousands of ACF
MMACF = Millions of ACF
SCF = Standard Cubic Feet
KSCF = Thousands of SCF
MMSCF = Millions of SCF
and press [Enter].
Metric
ACM = Actual Cubic Meters
KACM = Thousands of ACM
MMACM = Millions of ACM
SCM = Standard Cubic Meters
KSCM = Thousands of SCM
MMSCM = Millions of SCM
DigitalFlow™ XGS868i Programming Manual
Advertisement
Table of Contents
