Chapter 5. Clearing Data
5.1 Introduction
This chapter explains how to purge totalized measurements, site data and/or log files from the XGS868i's memory.
Note: For detailed information on creating a log file, see Chapter 3, Logging Data. For detailed information on
programming site data, see Chapter 1, Programming Site Data.
IMPORTANT:
None of the clearing procedures described in this chapter can be undone. Be very sure that the exact
consequences of a selected option are thoroughly understood before proceeding.
5.2 Clearing the XGS868i's Memory
If the XGS868i's available memory becomes nearly full, it may be necessary to purge some or all of the existing data
from memory, before any additional data can be stored. In order to accomplish this task, proceed to the appropriate
section for step-by-step instructions.
Note: Depending on the current configuration of the XGS868i, it may be possible to add additional memory by
installing an option card in
5.2.1 Clearing Site Data
This feature has not yet been implemented, because the XGS868i currently has no capability to store site files in its
own memory.
DigitalFlow™ XGS868i Programming Manual
. See Chapter 4, Parts Replacement, of the Service Manual for details.
Slot 2
Chapter 5. Clearing Data
71