Table of Contents
Advertisement
Appendix E. Foundation Fieldbus Communications
E.5 Resetting Instrument Totalizers
To reset the instrument totalizers:
1. Double click on the FLOW transducer block (in the tree under GEFlow-XGM; see Figure 56 on page 144).
2. Select the Others tab and scroll down to the CLEAR_TOTALIZERS listing.
3. Select Clear from the drop down list box (see Figure 59).
4. After the totals have been reset, select Normal from the drop down list box to resume total accumulation.
Figure 59: Clear Totalizers Drop Down List
DigitalFlow™ XGS868i Programming Manual
147
Advertisement
Table of Contents
