GE DigitalFlow XGS868i Programming Manual page 161

Table 33: GE Fieldbus Device Capability, XGX868 Family of Meter Types (cont.)
5 - User Layer General
5.1 Function Block Application Manufacturer
5.2 Function Blocks (list all type, but not including
transducer)
5.3 Device support block instantiation (Yes/No)
5.4 Number of Link Objects
5.5 Device support firmware upgrade over fieldbus
segment? (Yes/No)
5.6 Configuration write protect?
5.7 Zero trim, sensor trim, factory recall/ Upgrade device
master reset
6 - Resource Block
6.1 Block Class (Std, Enhanced, Custom)
6.2 Special Features
7 - Transducer Blocks
7.1 Transducer Blocks based on which latest version of
the FF spec
7.2 Block Type
7.3 Block Class (Std, Enhanced, Custom)
Does the Device support Methods in the Resource
and Transducer Blocks? (If it does, then the
functionality will be tested.)
7.4 Special Features besides Methods (multiple VIEWS,
etc.)
Device specific advanced diagnostics
8 - Function Blocks
8.1 Does the Device support Custom Function Blocks? An
example of custom block has Profile Number equal
to or greater than 0x8000. A standard enhanced
block has Profile Revision with 0xXXXX, where
Enhancement Number upper byte is non-zero (e.g.
0x5500 is en
8.2 Block Type
8.3 Number Available
8.4 Execution Time (ms)
8.5 Block Class (Std, Enhanced, Custom)
8.6 Function Block Special Features (e.g., Configuration
required for non-standard parameters by host)
DigitalFlow™ XGS868i Programming Manual
Appendix F. Foundation Fieldbus Tables
Fieldbus Inc.
6 - AI(e), 1 - PID(e), 2 -TB(c), 1 - RB2(e)
No
20
No
Hardware jumper only
None
Enhanced
Detailed errors, supported modes, revision id
and date
FF-902 FS 1.4
Flow/Display
Custom/Custom
No
Multiple View3s and View4s
Yes
No
AI/PID
6/1
50/100
Enhanced
None
151