Table of Contents
Advertisement
Chapter 3. Logging Data
3.7 Viewing PC Log Files
After one or more PC log files have been created, the logs may be viewed by using PanaView as follows:
1. You can access PC logs in two ways:
•
From the New Meter Browser in PanaView, expand the network tree and click on the PC Logs option. If you have
created one or more logs, the tree will appear similar to Figure 22 below. Double-click on the log name to open
the log, or
•
Pull down the Output menu (see Figure 13 on page 61), and click on the Log Browser option. Advance to the PC
Logs dialog box as described in previous sections. A screen similar to that shown in Figure 23 appears.
Notice that each of the log files in Figure 22 and Figure 23 has a traffic light icon next to its name. These icons indicate
the current status of the log as follows:
•
red light - log has not run to its specified stop time but has been manually stopped
•
green light - log is currently running but is not yet complete
66
Figure 22: The Expanded PC Logs Option
Figure 23: Selecting a Log File from the Log Browser
DigitalFlow™ XGS868i Programming Manual
Advertisement
Table of Contents
