GE DigitalFlow XGS868i Programming Manual page 106

Appendix C. Programming the XGS868i Using PanaView™
C.4 Entering the User Program using PanaView (cont.)
c. Do one of the following:
Click on [
Next Item]
Click on [
Previous Item
Note: If you click on either [
unchanged.
As you step through the menu, the bottom panel lists the current settings you have modified or left unchanged, as
shown in Figure 43. If you modify or step through more than five items, a scroll bar at the right of the panel lets you
review the earlier settings.
6. When you have completed entering parameters in a given option, click
double-click on another option, or click
You can double-click on another menu to modify its settings, or return to the New Meter Browser. Proceed to the
following sections to enter data in the
96
Figure 42: Pipe Parameters Option in the Site Edit Menu
to proceed to the next menu item, or
] to return back through the menu to a previous item.
or [
Next Item] Previous Item
Figure 43: Site Edit Menu with Current Settings
[Close]
to close the window.
Channel Global
or
] without changing the settings, the current settings remain
[Exit Page]
menus.
to close the option. You can then
DigitalFlow™ XGS868i Programming Manual