Creating A Standard Meter Log - GE DigitalFlow XGS868i Programming Manual

3.4.1 Creating a Standard Meter Log

3. To create a standard meter log, complete the following steps:
a. Double-click on the Create Standard Log option.The window now appears similar to Figure 12.
b. PanaView first asks for the Log Location, either flash or non-volatile RAM. Double-click on the desired
location.
c. Now type the desired Log Name in the right window, and click
d. Type the desired Log Message in the right window, and click
e. PanaView now asks for the Number of Variables you wish to log. Type in the desired number (from 1 to 6), and
[Next Item]
click
f. Double-click on the desired Channel for the first variable.
g. Scroll to and double-click on the desired Measurement to be logged.
h. Repeat steps f and g for the specified number of variables.
•
If you select a forward or reverse total, PanaView asks if you want to Reset Totals to 0? Double-click on Yes or
No.
i. PanaView indicates a given StartTime. Double-click on OK to agree to the given time, on Now to start the log
immediately, or on Edit to change the starting time.
•
If you select Edit, PanaView asks first for the desired Hour, then for the Minute, and finally for the Second.
For each parameter, type the desired number in the right window, and click
Item]
to step through the parameters).
DigitalFlow™ XGS868i Programming Manual
Figure 12: Log Location in the Create Standard Log Option
.
[Next Item]
.
[Next Item]
.
[Next Item]
Chapter 3. Logging Data
[Next
(or simply click
57