Entering The User Program Using Panaview - GE DigitalFlow XGS868i Programming Manual

Appendix C. Programming the XGS868i Using PanaView™
C.4 Entering the User Program using PanaView
Note: Be sure to record all the programming data entered in this chapter in Appendix B, Data Records.
Status System Pipe Channel Global-System
Programming of the , , and submenus of the menu and the menu are required
for basic operation of the Model XGS868i. Failure to accurately enter all of the necessary information will result in
unreliable flow rate data. Therefore, be sure to complete at least the sections of this chapter pertaining to those three
submenus. Except for those three submenus, it is not necessary to program the Model XGS868i flowmeter in any
particular order. Therefore, the sections of this chapter need not be completed in sequence. Enter the user program as
described below and proceed immediately to any section of interest.
To begin entering data into the XGS868i using PanaView:
1. From the meter tree in the New Meter Browser (shown in Figure 37 on page 93), click on the XGS entry. The
screen now appears similar to Figure 39.
Figure 39: Meter Tree with Edit Functions Option
2. Expand the Edit Functions option. The window now appears similar to that shown in Figure 40 on page 95.
94 DigitalFlow™ XGS868i Programming Manual