Table of Contents
Advertisement
Appendix C. Programming the XGS868i Using PanaView™
C.8 Saving Site Data
The XGS868i holds setup parameters for a single internal site, called Working. Through PanaView, users can store site
file data in a PC and reload it into the XGS868i. To save or reload site data via PanaView:
1. In the New Meter Browser, highlight the XGS868i.
2. Right-click on the highlighted XGS868i and select the Properties option, as shown in Figure 49.
The window now appears similar to Figure 50.
132
Figure 49: The Properties Option
Figure 50: The Properties Window
for an XGS868i
DigitalFlow™ XGS868i Programming Manual
Advertisement
Table of Contents
