Saving New Site Data To The Xgs868I; Saving A Site To The Pc - GE DigitalFlow XGS868i Programming Manual

Appendix C. Programming the XGS868i Using PanaView™
C.8.2 Saving New Site Data to the XGS868i
To save new site data to the meter:
1. Select the radio button for New and click on the [Save Site to Meter] button.
2. A window opens similar to Figure 53. Enter the desired name, and click [OK].
3. The Site File Selection window (Figure 52 on page 133) opens. Highlight a site file with the desired settings, and
[Open].
click The site file becomes the Working site in the meter with the desired settings.
C.8.3 Saving a Site to the PC
To save a site to the PC:
1. Highlight the desired site in the left pane. (See Figure 51 on page 133.)
2. Click [Save Site to PC]. A window opens similar to Figure 52 on page 133.
3. Enter the desired site name and click
specified.
Note: If you have created a site on the meter after opening the Site File Operations window, you must close and
reopen the window to click on the new site.
134
Figure 53: Site Name Entry Window
. PanaView saves the site in the PanaView folder unless otherwise
[Save]
DigitalFlow™ XGS868i Programming Manual