Creating An Error Log - GE DigitalFlow XGS868i Programming Manual

3.4.2 Creating an Error Log

To create an error meter log, complete the following steps:
1. Double-click on the Create Error Log option.
a. PanaView first asks for the Log Location, either flash or non-volatile RAM. Double-click on the desired
location.
b. Now type the desired Log Name in the right window, and click
c. Type the desired Log Message in the right window, and click
d. PanaView now asks for the Number of Variables you wish to log. Type in the desired number (from 1 to 6), and
[Next Item]
click
e. Double-click on the desired Channel for the first variable.
f. Scroll to and double-click on the desired Measurement.
g. Repeat steps e and f for the specified number of variables.
•
If you select a forward or reverse total, PanaView asks if you want to Reset Totals to 0? Double-click on Yes or
No.
h. PanaView asks, Is Log Circular? Double-click on Yes or No.
i. PanaView indicates a given StartTime. Double-click on OK to agree to the given time, on Now to start the log
immediately, or on Edit to change the starting time.
•
If you select Edit, PanaView asks first for the desired Hour, then for the Minute, and finally for the Second.
For each parameter, type the desired number in the right window, and click
Item]
to step through the parameters).
j. PanaView indicates a given StartDate. Double-click on OK to agree to the given day, on Today to start the log
that day, or on Edit to change the starting date.
•
If you select Edit, PanaView asks first for the desired Year, then for the Month, and finally for the Day. For
each parameter, type the desired number in the right window, (or scroll to and click on the desired month) and
[Next Item]
click
DigitalFlow™ XGS868i Programming Manual
.
[Next Item]
(or simply click
[Next Item]
[Next Item]
to step through the parameters).
Chapter 3. Logging Data
.
.
[Next Item]
(or simply click
[Next
59