Table of Contents
Advertisement
Appendix C. Programming the XGS868i Using PanaView™
Saving Site Data (cont.)
3. Click on the [Site Files] button. The Site File Operations window (shown in Figure 51) opens.
Figure 51: The Site File Operations Window
C.8.1 Saving Current Site Data to the Meter
To save existing site data to the meter:
1. Select the radio button for Selected and highlight an existing site in the left pane.
2. Then click on the [Save Site to Meter] button. A screen opens similar to Figure 52.
Figure 52: Site File Selection
3. Highlight the desired site and click [Open]. PanaView sends the site to the meter.
DigitalFlow™ XGS868i Programming Manual
133
Advertisement
Table of Contents
