GE DigitalFlow XGS868i Programming Manual page 105

C.4 Entering the User Program using PanaView (cont.)
3. To enter data into the user program, double-click on the Site Edit Menu. The window appears similar to Figure 41.
Note: For a 1-Channel XGS868i, the
4. To enter a particular menu (Channel 1, Channel 2, or Global), highlight and double-click on the desired menu in
the left pane. For example, clicking on Channel 1 in Figure 40 opens the list of options shown in the center pane.
5. To enter a particular option:
a. Highlight and double-click on the desired option in the center pane. Figure 42 on page 96 shows the first entry
(Transducer Number) in the Pipe Parameters option. The title above the center pane lists the current entry,
while the center pane displays the available selections for that entry.
b. Click on the desired choice; if the entry requires a numeric or text value, change the value displayed in the right
pane.
DigitalFlow™ XGS868i Programming Manual
Figure 40: Menus in the Edit Functions Option
Channel 2
option does not appear.
Figure 41: The Site Edit Menu Window
Appendix C. Programming the XGS868i Using PanaView™
95