Table of Contents
Advertisement
Chapter 1. Programming Site Data
1.9.1b
Selecting Totalizer Units
1. Scroll to the desired Totalizer Units for the totalized flow rate display and press [Enter]. Available units are listed in
Table 5 on page 21.
2. Scroll to the desired number of Tot Decimal Digits (digits to the right of the decimal point in the totalized flow rate
display) and press [Enter].
3. Do one of the following:
•
If MASS FLOW is ON, proceed to Selecting the Mass Flow Units below.
If MASS FLOW is OFF, the meter returns to the Channel PROGRAM window. Go to Procedure Options on the
•
following page.
Note: To activate mass flow, refer to page 19. The following prompts will only appear if mass flow is activated for
both channels.
1.9.1c
Selecting Mass Flow Units
1. Scroll to the desired Mass Flow units for the flow rate display and press [Enter]. The available units for this prompt
are determined by the selection made at System Units (see Table 6).
2. Scroll to the desired Mass Flow Time units for the mass flow rate display and press [Enter].
3. Scroll to the desired number of Mdot Decimal Digits (digits to the right of the decimal point in the mass flow rate
display) and press [Enter].
4. Scroll to the desired Mass (Totalizer) units for the totalized mass flow rate display and press [Enter]. The available
units for this prompt are determined by the selection made at the System Units prompt.
5. Scroll to the desired number of Mass Decimal Digits (digits to the right of the decimal point in the totalized mass
flow rate display) and press [Enter].
Procedure Options
After completing the steps on the previous page, the XGS868i returns to the Global PROGRAM window. Do one of the
following:
•
To continue programming, refer to Appendix A, Menu Maps, to navigate to the desired menu.
To leave the Keypad Program, press [Escape] twice.
•
22
Table 6: Available Mass Flow Units
English
LB = Pounds
KLB = Thousands of LB
MMLB = Millions of LB
Tons (2,000 LB)
Metric
KG = Kilograms
Tonne = Metric Tons (1,000 KG)
DigitalFlow™ XGS868i Programming Manual
Advertisement
Table of Contents
