Husky Altanium Matrix5 User Manual page 237

User Guide
4.
Figure 15-38 USB Extension Cable
5.
Figure 15-39 DisplayPort to HDMI Converter (DisplayPort Connector End)
Install the Dual Touch Monitor
Connect the USB Extension cable (USB Type A connector end) to one of the available
USB ports on the bottom of the MCU enclosure. Refer to
Connect the DisplayPort to HDMI Converter (DisplayPort connector end) to the
DisplayPort connector (behind the VGA connector) on the bottom of the MCU
enclosure. Refer to Figure
v 1.0 — February 2020
15-39.
Maintenance
Figure 15-38.
225