Husky Altanium Matrix5 User Manual page 161

User Guide
Figure 11-2
1. Select File Name Button 2. Image File Name Field 3. Auto Fit Image Check Box 4. First
Selection Field 5. Second Selection Field 6. Zone Number
5.
6.
7.
8.
9.
10. Touch the Accept button.
Load a Mold Picture View Graphic
1 1
Change View Settings Dialog Window
Touch the Select File Name button.
Touch one of the file location buttons that follow:
• Local - to navigate to a graphic file stored on the Altanium.
• Network - to navigate to a graphic file stored on a network.
• USB - to navigate to a graphic file stored on a USB drive.
Navigate to where the image is stored.
Select the image.
Touch the Accept button.
NOTE:
To automatically increase the size of the image to fill the Mold Picture View
screen, touch the Auto Fit Image check box so the check mark shows.
v 1.0 — February 2020 Mold Picture View
2
3
4
5
6
149