Test Results Screen Values - Husky Altanium Matrix5 User Manual

User Guide
The buttons and fields on the Test Results screen are described in
Table 8-2
Mold Diagnostics
Rewire
Test Results
Cross-Talk
Temperature Graphs
Start Time
Elapsed Time
8.2.1

Test Results Screen Values

The test result columns are described in
Table 8-3
Zone
Name
Sen.
Fuses
T/C
Amp
VAC
Test Results Screen Values
v 1.0 — February 2020
Test Results Screen Buttons and Fields
Item
Opens the Mold Diagnostics screen.
Automatically reassigns all the sensors to their correct location with the
use of the test results.
Opens the Test Results screen from the Cross-Talk and Temperature
Graphs screens.
Opens the Cross Talk screen.
Opens the Temperature Graphs screen.
The time the test was started.
The elapsed time of completed test.
Test Result Columns
Item
Shows the zone number.
Shows the zone name.
Identifies the number of the sensor that is used for that zone.
The fuses test shows if the fuse for that zone operates correctly. The fuse
values are shown as follows:
• Question Mark: the fuse test for the zone was not done.
• Check Mark: shows the fuse for the zone completed the test
satisfactorily.
• X: shows a failure of the fuse test for the zone.
The thermocouple test shows if the thermocouple for that zone operates
correctly. The thermocouple values are shown as follows:
• Question Mark: shows the thermocouple test for the zone was not
done.
• Check Mark: shows the thermocouple for the zone completed the
test satisfactorily.
• X: shows a failure of the thermocouple test for the zone, because it
was reversed or lost.
Current drawn by the heater during the test for each zone.
Line voltage reading during the test for each zone.
Description
Table 8-3.
Description
Mold Diagnostics
Table 8-2.
87