Delete A Leader Line; Delete A Zone Information Panel; Exit Edit Mode - Husky Altanium Matrix5 User Manual

User Guide

11.3.2.7 Delete a Leader Line

To delete a leader line, do the steps that follow:
1.
2.

11.3.2.8 Delete a Zone Information Panel

To delete a zone information panel, do the steps that follow:
1.
2.
3.

11.3.3 Exit Edit Mode

To exit Edit mode, do the steps that follow:
1.
2.
Delete a Leader Line
Make sure that the Mold Picture View is in Edit mode.
Touch and drag the leader line to be deleted onto the related zone information panel or
off the mold picture view graphic.
Make sure that the Mold Picture View is in Edit mode.
Touch and drag the zone information panel to be deleted onto the Delete button (refer
to Figure 11-4) or off the mold picture view graphic.
or
Select the zone information panel and touch the Delete button.
Make sure that the Mold Picture View is in Edit mode.
Touch the Accept button (green check mark). Refer to
v 1.0 — February 2020 Mold Picture View
Figure 11-4.
155