Setpoint Limits; Manual Standby - Husky Altanium Matrix5 User Manual

7.6.1.3 Setpoint Limits

The Setpoint Limits fields are described in
Table 7-7
Temperature Minimum
Temperature Maximum
Power Minimum
Power Maximum

7.6.1.4 Manual Standby

The Manual Standby fields are described in
Table 7-8
Temperature Setpoint
Temperature Minimum
Temperature Maximum
Power Setpoint
Power Minimum
Power Maximum
64
v 1.0 — February 2020
Setpoint Limits Fields
Item
These values specify the range limits in which the Temperature Setpoint
field can be set.
These values specify the percentage range limits in which the Power
Setpoint field can be set.
Manual Standby Fields
Item
The temperature to which all zones are set when the Standby button is
touched. This setting can be used to lower all zone temperatures to their
Manual Standby temperature setpoint until the timer completes or the
user touches the Standby button again. Possible values are 0 to 500 °C or
32 to 932 °F. The default value is 121 °C or 250 °F.
These values specify the range limits in which the Standby temperature
can be set.
The power output to which all zones are set when the Standby button is
touched. This setting can be used to lower all zone power setpoints to
their manual standby power setpoint until the timer completes or the
user touches the Standby button again. Possible values are 0% – 100%.
The default value is 10%.
These values specify the percentage range limits in which the Standby
power can be set.
Table 7-7.
Description
Table 7-8.
Description
Altanium Matrix5
Setpoint Limits