Husky Altanium Matrix5 User Manual page 223

User Guide
Figure 15-17 MCU Cable Connections
5.
IMPORTANT!
Only loosen the top fasteners. The top mounting holes in the bracket holding the touch
monitor are slotted and allow the monitor to be removed without removing the top
fasteners completely.
Figure 15-18 MCU Screw Removal
Remove and Replace the MCU
Find the two lower screws that hold the MCU to the mounting bracket and completely
remove them with a 4 mm right angle Allen key or hex wrench. Refer to
v 1.0 — February 2020 Maintenance
Figure 15-18.
211