Husky Altanium Matrix5 User Manual page 221

User Guide
Figure 15-15 Removal of the Monitor Screws
9.
10. Securely hold the touch monitor and slide it up until the screws have cleared the upper
Figure 15-16 Lift Monitor from Bracket
Remove and Replace the Touch Monitor
Use a 4 mm right angle Allen key or hex wrench to loosen, but do not remove, the two
top socket cap screws from the retaining plate that secures the touch monitor to the
pedestal. Refer to number 6 in
mounting slots and pull forward to remove the touch monitor from the mounting
bracket. Refer to number 7 in
v 1.0 — February 2020
Figure 15-15.
Figure 15-16.
Maintenance
209