Load A Mold Picture View Graphic - Husky Altanium Matrix5 User Manual

11.1.2 Load a Mold Picture View Graphic

The Altanium can show up to five different images in the mold picture view. To load a mold
picture view graphic, do the steps that follow:
1.
2.
Figure 11-1
1. Edit Button 2. Views
3.
4.
148
On the Home screen, touch the Mold Picture View button.
The Mold Picture View screen shows. Refer to
NOTE:
To change a mold picture view graphic that has been loaded, touch the name of
the view that contains the mold picture view graphic to be changed.
Touch a name (Tips, Manifold, Sprue, or Maintenance) in the Views area to upload the
new mold picture view graphic.
Mold Picture View Screen
Touch the Edit button.
Touch the Change View Settings button.
The Change View Settings Dialog Window shows. Refer to
v 1.0 — February 2020
Figure
Altanium Matrix5
11-1.
Figure 11-2.
Load a Mold Picture View Graphic