Input/Output Connector Pin-Out Description; Input Base Connector Id - Husky Altanium Matrix5 User Manual

User Guide
Table 13-6
Item
4
5
6
7
8
9
10
11
12
13

13.3 Input/Output Connector Pin-Out Description

The sub-sections that follow give the connection details for all of the optional inputs and
output signals. Inputs are active High (12 VDC with a maximum current rating of 1 A). All
outputs are a dry contact relay type.

13.3.1 Input Base Connector ID

The input connector pins are identified in
Table 13-7
Input / A
Input / B
Input / C
Input / D
Input/Output Connector Pin-Out Description
v 1.0 — February 2020
Matrix5 Connector Identification (Continued)
Cable Connection
EtherCAT, if Communication to UltraSync-E Gen2, Altanium Servo Control,
equipped Individual Servo Vale Gate, or Valve Gate Sequencer systems.
Inputs, if Configurable digital inputs.
equipped
Outputs, if Configurable digital outputs.
equipped
Output COMM CANBus communication to Altanium mainframe.
USB Ports Touchscreen signal to secondary touch monitor.
NOTE:
Touch Screen Touch screen signal to the primary touch monitor.
LCD 12 VDC Out Power to the primary touch monitor.
Display Port Video signal to secondary touch monitor.
NOTE:
Part Count, if Part count option signals.
equipped
Remote Load, if Remote load option signals.
equipped
Input Base Connector Pins
Connector/Pin Field Cable Wire Color
WHT
WHT/BLK
BLK
BLK/WHT
Description
Only used if controller was ordered with this option.
Only used if the controller was ordered with this option.
Table 13-7.
Remote standby
Remote boost
Remote start
Cooling lines not enabled
System Options
Signal Function
185