Network Configuration; Querythecurrentipstatus; Settheipaddress; Setthesubnetmask - Lightware HDMI-TPS-TX210 User Manual

   
6.LW2Programmer'sReference
6.6. Network Configuration
6.6.1. Query the Current IP Status
IPaddresssettingscanbequeriedasfollows.
Command and Response
 {IP_STAT=?}
 (IP_STAT=<type>;<ip_address>;<subnet_mask>;<gateway_addr>)CrLf
Parameters
Identifier Parameterdescription
<type> AssignmentoftheIPaddress
<ip_addr> IPaddress
<subnet_mask> Subnetmask
<gateway_addr> Gateway address
Example
 {ip_stat=?}
 (IP_STAT=0;192.168.0.100;255.255.255.0;192.168.0.1)
The device has a static (fix) IP address: 192.168.0.100; the subnet mask is 255.255.255.0, the gateway
addressis192.168.0.1.
6.6.2. Set the IP Address
IPaddresscanbesetasfollows.
Command and Response
 {IP_ADDRESS=<type>;<ip_address>}
 (IP_ADDRESS=<type>;<ip_address>)CrLf
Parameters
Seetheprevioussection.
Example
 {ip_address=0;192.168.0.110}
 (IP_ADDRESS=0;192.168.0.110)

INFO: TheIPaddresscanbequeriedbytypingthe"ip_address=?"command.Theresponsecontainsthe
fixIPaddressthatisstoredinthedeviceevenifDHCPisenabled;inthiscase,thisIPaddressisnotvalid.
#dhcp #ipaddress #network
Parametervalues
0: static
1:dynamic(DHCP)
(four decimal octets separated by dots)
(four decimal octets separated by dots)
(four decimal octets separated by dots)
Appliedfirmwarepackage:v1.2.0 | LDCsoftware:v2.2.0
HDMI-TPS-TX200series–User'sManual
6.6.3. Set the Subnet Mask
Subnetmaskcanbesetasfollows.
Command and Response
 {IP_NETMASK=<subnet_mask>}
 (IP_NETMASK=<subnet_mask>)CrLf
Parameters
SeetheQuerytheCurrentIPStatus
Example
 {ip_netmask=255.255.255.0}
 (IP_NETMASK=255.255.255.0)
INFO:
Thesubnetmaskcanbequeriedbytypingthe"ip_address=?"command.Theresponsecontains
thefixIPsubnetmaskthatisstoredinthedeviceevenifDHCPisenabled;inthiscase,thisIPsubnet
mask is not valid.
6.6.4. Set the Gateway Address
Gateway address can be set as follows.
Command and Response
 {IP_GATEWAY=<gateway_addr>}
 (IP_GATEWAY=<gateway_addr>)CrLf
Parameters
SeetheQuerytheCurrentIPStatus
Example
 {ip_gateway=192.168.0.50}
 (IP_GATEWAY=192.168.0.50)
INFO:
The gateway address can be queried by typing the "ip_gateway=?" command. The response
containsthestaticIPgatewayaddressthatisstoredinthedeviceevenifDHCPisenabled.Inthatcase,
thelatestvalidgatewayaddress(forstaticIP)isstored.
6.6.5. Apply Network Settings
Applythenetworksettingsandrestartthenetworkinterface.
Command and Response
 {ip_apply}
 (IP_APPLY)CrLf
Example
 {ip_apply}
 (IP_APPLY)
section.
section.
63