Table of Contents
Advertisement
5.SoftwareControl-LightwareDeviceController
5.13.3. Upload the Settings to a Device (Restore)
WARNING!
Please note that the settings will be permanently overwritten with the restored parameters
in the device. Withdrawal is not possible.
ATTENTION!
Thecloningcanbesuccessfulifthebackupfileisdownloadedfromthesametypeofsource
device as the destination device.
The Restoring Process
Step 1. SelecttheSettings/Backup tab from the menu.
Step 2. Click on the Choose filebuttonontherightpanelandbrowsethedesiredfile.
Step 3. The file is checked and the result will be displayed in the textbox below. If the file is correct, the
settingscanberestored.
Step 4. Choose IP settingswhatyouwanttouseafterbackup.Youcanapplysettingsfromthebackupfile,
keepactualsettings,setitmanuallyinadialogboxorapplyDHCP.
Step 5. Select the desired MAC filter settings to be applied in the device. See more information about this
feature in the
MAC Filter Allowlist
Step 6. PresstheStart restore process button and click on the Yes button when asked.
Step 7. Rebootthedevicetoapplythenetworksettingsafterfinishing.
5.13.4. Create and Restore Backups from the Device Memory
Thedevicecanstoreconfigurationsinitsownmemory,fourslotsareavailableforthispurpose.
Youcansavetheconfigurationtothedesiredslot:
without protection: itcanbeeasilyapplied/deleted,or
▪
with protection: itcanbeprotectedbyapasswordtoapplyordeletetheconfiguration.
▪
Loadingtheselected
configuration
Savingthecurrentconfiguration
to the selected slot without
protection
Savingthecurrentconfiguration
to the selected slot with a
password
The presets can be used for the macros as well, please see the
WARNING!
Loading factory default settings will erase all presets in the device memory!
section.
Deletingtheselected
configuration
Loadingaconfigurationfrom
afiletotheselectedslot
Savingtheselected
configurationasafile
Macros
section.
Appliedfirmwarepackage:v1.3.2b3 | LDCsoftware:v2.5.7b2
HDMI-TPS-TX200series–User'sManual
65
Advertisement
Table of Contents
