Advertisement
bizhub C4000i/C3300i
• Make sure that the harness is routed inside the main body.
• Make sure that the harness is routed through the wire
saddle [1].
1. Remove the rear cover.
F.4.1.3 Rear cover
[1]
[1]
[3]
[3]
[2]
[1]
[2]
[1]
[2]
CAUTION
[1]
[2]
[1]
[1]
F DISASSEMBLY/REASSEMBLY > 4. bizhub C4000i/C3300i
2. Remove four screws [1], and remove the plate [2].
3. Remove the harness from the wire saddle [1] and the edge cover [2], and
disconnect four connectors [3].
4. Remove the harness from seven wire saddles [1], and disconnect three
connectors [2].
NOTE
▪ When installing the DC power supply, make sure the position of the
tie band.
F-22
Advertisement
