Advertisement
bizhub C4000i/C3300i
NOTE
▪ This function cannot be enabled when Transmission protocol, SMB Setting or HTTP Setting, Backup target and Encryption
Password have not been set.
Setting item
Function Setting
Transmission protocol
SMB
Host Name
Setting
File Path
User Name
Password
HTTP
URL
Setting
User Name
Password
Proxy
Backup target
Encryption Password
<Auto backup>
• Set the auto backup setting.
NOTE
▪ It is displayed when Backup Settings is enabled.
Setting item
Auto backup
Backup period
Interval
of day(s)
Weekly
frequenc
y
Backup time
<Immediate backup>
• To be used for executing backup immediately.
• If "OK" appears when pressing "Start", the backup is completed successfully.
• If "NG" appears, an error code will be displayed. Contact the KM representative as necessary.
• N******: Error related to network.
• S******: Error other than that related to network.
<Backup result>
• To make a confirmation of the date and time when the final backup is completed successfully.
• Up to 100 backup logs can be displayed in the order from the latest backup.
Setting when selecting backup to the server 2
<Format>
• To select a format to backup.
Setting item
Generic format
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 2. ENHANCED
To set whether to back up data to a server.
• When [ON] is selected, configure settings required for backup.
To select a Transmission protocol.
To be set when "SMB" is selected for Transmission protocol.
To be set when "HTTP" is selected for Transmission protocol.
To select a target to back up.
Items of (*) are displayed only when selected [Enable] in [Service
Mode] -> [System 2] -> [Maintenance Mode], and [Allow] in
[Administrator] -> [Security] -> [Security details] -> [Maintenance
Mode Access].
Enter the encryption password.
To set whether to execute auto backup.
• When "Yes" is selected, configure the following settings.
Select the backup as Interval of day(s).
Select the backup as Weekly frequency.
To setting a time to back up.
Select to backup of box documents by generic format.
Contents
Contents
Contents
J-26
SECURITY
Setting value
Default
setting
ON
Disable
SMB
HTTP
Alphanumeric characters
and symbols up to 253
characters
255 characters maximum
64 characters maximum
64 characters maximum
Alphanumeric characters
and symbols up to 253
characters
64 characters maximum
64 characters maximum
ON/Disable
Remote Access Setting
User Settings
Service setting
Address Book (*)
Authentication Data (*)
Network Settings (*)
Accessibility (*)
Administrator Setting (*)
Cloud connection (*)
Display Custom Settings
(*)
External Cert (*)
1 to 32 characters
Setting value
Default
setting
Set
Unset
1 to 30 days
Sun, Mon, Tue, Wed, Thu,
Fri, Sat
Hour: 00 - 23
Minute: 00 - 59
○
○
-
-
-
-
○
-
-
Advertisement
