Advertisement
bizhub C4000i/C3300i
10.7 User Paper Settings
• To set and register individual user paper that includes a different basic weight, fusing temperature, 2nd image transfer fine adjustment
value.
• [User Paper Settings] is also available from [Utility] -> [Expert Adjustment].
• To register a paper type that is suitable for individual customer's intended use and use environment.
Registered
Paper
Key
Type
User Paper 1 Plain
60 to 90 g/m
paper
User Paper 2 Plain
91 to 105 g/m
paper+
User Paper 3 Thick 1
106 to 120 g/m
User Paper 4 Thick 1+ 121 to 157 g/m
User Paper 5 Thick 2
158 to 209 g/m
<Procedure>
1. Select the desired key from [User Paper 1] to [User Paper 5] to register user paper.
2. Select [Basic Weight] and enter a value with the [+] / [-] key.
3. Select a target item of Fusing Temperature and enter a fusing temperature with the [+] / [-] key.
4. Select a target item of 2nd Transfer Adj., and enter a 2nd image transfer fine adjustment value with the [+] / [-] key.
5. Load the manual bypass tray with paper.
• Paper Size: A4S, 81/2 x 11S
6. Select [1Side] (only front side) or [Front Side] (only back side) and press the Start key.
7. Check the image of the output test pattern.
• If the image is not acceptable, adjust the settings and output the test pattern again.
Test Pattern in User Paper Settings
• The printable test pattern for user paper settings is provided to ease determining the most appropriate 2nd image transfer output value
when customizing user paper.
• The test pattern outputs a pattern for Standard value A (2nd image transfer output control) according to the 2nd image transfer fine
adjustment setting range. (Every two steps)
• Refer to the printed pattern, and select the 2nd image transfer fine adjustment setting.
10.8 Coverage Rate Screen
• To set whether or not to display a coverage rate on the sales counter screen and sales counter list.
• Coverage Counter instead of Coverage Rate is displayed when Switch No. 206 is set to [00000001] at Bit assignment/[01] at HEX
assignment in [Service Mode] -> [System 2] -> [Software Switch Setting].
Display
Do Not Display
10.9 JAM Code Display Setting
• To set whether or not to add a jam code to a jam warning display on the control panel when a jam occurs.
Display
Do Not Display
10.10 Import Config. Data
10.10.1 BootUp Screen
• To customize the BootUp Screen displayed upon machine start-up.
• Use this feature when changing the Konica Minolta logo displayed on the control panel upon start-up for client's intended use of the
machine.
NOTE
▪ In the following conditions, import of BootUp Screen data is prohibited.
▪ [Administrator] -> [Security] -> [USB Connection Permission setting] is set to [Restrict].
▪ [Administrator] -> [Security] -> [USB Connection Permission setting] -> [Detail Setting] -> [External Memory(Service)] is set
to [Restrict].
▪ [Administrator] -> [Security] -> [Enhanced Security Mode] is set to "ON".
Preparation of registrable image data
Specifications of registrable image data
Items
Image format
PNG format
File extension
".bin" or ".zip"
FileName
BootUpScreen*.bin or BootUpScreen*.zip (* represents user-defined text)
Image size
800 x 480 dots
Basic weight
Setting range
Setting
item
2
(Step: 1)
600 dpi
2
(Step: 1)
2
(Step: 1)
2
(Step: 1)
2
(Step: 1)
Setting value
Setting value
Fusing Temperature
Setting range
- 20 °C to +10℃ (step: 5℃)
Contents
I-36
I SERVICE MODE > 10. System 2
2nd Transfer Adj.
Setting item
Front - Color
-8 to +7 (Step: 1)
Front - Black
Back - Color
Back - Black
Default setting
○
Default setting
○
Setting range
Advertisement
