Related Manuals for Konica Minolta AccurioPress C4080
Summary of Contents for Konica Minolta AccurioPress C4080
- Page 1 Education Newsletter Shortcut Manual 簡易說明書 For details operations, please refer to full set manual 詳細的操作說明，請參照完整的操作說明書 https://manuals.konicaminolta.eu/AccurioPress-C4080-C4070-C4065/EN/index.html...
-
Page 3: Control Panel
Control Panel 1. 數字按鍵 1. Keypad 2. 重設 2. Reset 3. 電源指示燈 3. Power Led 4. 數據指示燈 4. Data LED 5. 插隊 5. Interrupt 6. 停止 6. Stop 7. 校對複印 7. Proof Copy 8. 開始 8. Start 9. 開始指示燈 9. Start LED 10.C（清除）... -
Page 4: Screen Overview
Screen Overview 面板概要 Overview of Machine Screen 機器面板概要 1. Machine configure display - Displays 1. 機器配備顯示 ﹣ 顯示主機身的配備和附 the configuration of main body and 加配件 options 2. 作業顯示區域 2. Job display ﹣ 顯示現在的 area - 工作情況 Displays the current status 3. - Page 5 Screen Overview 面板概要 Overview of Job List Screen 工作清單面板概要 1. [Hold Job] - 1.[保留作業] ﹣ It allows you 管理保存的工作 to manage the hold jobs 2.[安全作業] ﹣ 拿取經電腦傳送的 2. [Secure Job] 安全列印功作 - It is available to retrieve 3.[時間表] ﹣ 更改 print jobs 預約工作的次序和...
- Page 6 Screen Overview 面板概要 Overview of CNTL Screen 控制器面板概要 1. [Hold] - It 1.[保留] ﹣ 管理保 allows you to 存的工作 manage the status and 2.[HDD] ﹣ 管理 information HDD的工作 4 5 6 7 8 2. [HDD] - It 3.[安全的] ﹣ 管 allows you to 理設置了密碼的工...
- Page 7 Screen Overview 面板概要 Overview of Copy Screen 影印面板概要 1. [Original 1. [原稿設定] - Setting] - 設定原稿的種 Set original 類和方向 type and direction 2. [分批掃描]﹣ 把於鏡面或自 2. [Separate 動送稿器的掃 Scan] - 描文件歸成一 Handling 個工作處理 original scanned 3. [彩色]﹣ 選擇 from ADF/ 色彩模式，...
-
Page 8: Copy Function
Copy Function 影印功能 Color 彩色 Select copy color mode 選擇影印的色彩模式 1. Touch [Copy] 1. 按[複印] 2. Select 2. 選擇 i. [Single Color] i. [單色] ii. [Black] ii. [黑色] iii. [Full Color] iii. [全彩] iv. [Auto Color] iv. [自動彩色]... - Page 9 Copy Function 影印功能 Density 濃淡度 Adjust the copy density 調整影印的濃淡度 1. Touch 1.按[品質調整] [Quality Adj.] 2.於複印濃淡度 設定 濃淡度的深 2. Adjust the 淺 density is lightened or darkened...
- Page 10 Copy Function 影印功能 Zoom 倍率 Adjust the zoom ratio 調教縮放比例 1. Touch 1.按[縮放] [Zoom] (A)固定倍率 選擇預設的縮放 (A)Fixed Zoom 倍率 Select fixed 列如.[A5 ▶ zoom size A3],[2.000] *e.g.[A5 ▶ A3],[2.000] (B)手動縮放 按[垂直]/[水平 (B)Manual 倍率] 輸入縮放 Zoom 比列 Touch [Vert. / Horiz. Zoom] (C)自動...
- Page 11 Copy Function 影印功能 Simplex/Duplex 雙面/組合 Choose 按[雙面/組合] [1 > 1] [1 > 2] 選擇 [2 > 1]or [1 > 1] iii. [2 > 2] [1 > 2] [2 > 1]或 iii. [2 > 2] 1 > 2 1 > 2 印...
- Page 12 Copy Function 影印功能 Bind Direction 訂裝方向 1. Touch [Output 1.按[輸出設定] Setting] 2.選[左﹠右] 2. Select 或[頂端] [Right&Left] or [Top]...
- Page 13 Copy Function 影印功能 Sort / Group 分頁/ 群組 Select whether to sort or group when 選取列印多份時以分頁或分組輸出 printing multiples sets of copies 1.按[輸出設定] Touch [Output 2.選擇 Setting] i.[移位分頁] ii.[分頁] Select iii.[移位分類] [Offset iv.[群組] Sort] [Sort] [Offset iii. Group] [Group] Sort Group Offset...
-
Page 14: Scan Function
Scan Function 掃描功能 Overview of Scan operation Screen 掃描面板概要 1. Scan type - 1.掃描類型 ﹣ Email,HDD, 電郵，HDD， SMB, FTP SMB， FTP 2.[A to Z]﹣ 2. [A to Z] - 顯示以英文字 Display an 母為字首的的 address in 地址 which the reference 3.[其它]﹣ 顯 name is 示非英文字母... - Page 15 Scan Function 掃描功能 Overview of Scan Setting 掃描設定概要 1. [Original 1.[原稿設定] Setting] - ﹣更改原稿方 Change original 向和類型 orientation and type 2.[分批掃描] ﹣分批掃描文 2. [Separate 件並整合成一 Scan] - The 個檔案 scan operation is divided into 3.[尺寸設定] serval sessions ﹣設定掃描範 and combine 圍...
-
Page 16: Tray Setting
Tray Setting 紙盤設定 Change Tray Setting(Part1) 紙盤設定(第一部份) 1. Touch 1.按[機器] [Machine] 2.按[紙張設定] 2. Touch [Paper Setting] 3.選擇紙盤 3. Select tray 4.按[變更設定] 4. Touch [Change Set]... - Page 17 Tray Setting 紙盤設定 Change Tray Setting(Part2) 紙盤設定(第二部份) 5. Paper Type - Select 5. 選擇紙張種類 a. [Plan] a. [普通紙] b. [Fine] b. [優質紙] c. [Color Specific] c. [彩色特殊] d. [Coated-GL(Gloss Laser) d. [塗工紙﹣GL] e. [Coated-ML(Mat Laser) e. [塗工紙﹣ ML] f. [Coated-GO(Gloss Offset) f.
- Page 18 Tray Setting 紙盤設定 Custom Size Setting 自訂尺寸設定 1. Touch 1.按[機器] [Machine] 2.按[紙張設定] 2. Touch [Paper Setting] 3.選擇紙盤 3. Select tray 4.按[變更設定] 4. Touch [Change 5.按[紙張尺寸] Set] 6.按[自訂] 5. Touch [Paper Size] 7.按[1]輸入寬度，按 [2]輸入長度 6. Touch [Custom] 8.按 [OK] 7. Touch [1] to input width and [2] to input...
- Page 19 Tray Setting 紙盤設定 Both Side Adjustment(Part1) 兩面調整(第一部份) Scan Meas. 掃描測量 Adjustment 跟據前面影像的大少 Adjust the 和位置，來調整背面 magnification ratio 影像. and printing position of the 1.按[機器]和[兩面 back side with 調整] reference to the printing position of 2.按[掃描測量] the front side 3.選擇紙盤 1. Touch [Machine] and 4.按[背景頁輸出] [Both Sides]...
- Page 20 Tray Setting 紙盤設定 Both Side Adjustment(Part2) 兩面調整(第二部份) 7. Touch [Output 7.按[輸出調整測試 Adjustment 圖] Chart] 8.按[黑色] 8. Touch [Black] 9.按[Start]打印調整 9. Press [Start] to 測試圖 print out the adjustment 10.按 [排出列印模 chart. 式] 10.Touch [Exit PrintMode]...
- Page 21 Tray Setting 紙盤設定 Both Side Adjustment(Part3) 兩面調整(第三部份) 11.Touch [Scan 11.按[掃描調整測試 Adjustment 圖] Chart] 12.按照屏幕的指示放 12.Set the 好背景頁和調整測試圖, background 並且掃描 sheet and 13.按[Yes]完成 adjustment chart according to the instruction on the screen, and then scan 13.Touch [Yes] to finish...
- Page 22 Tray Setting 紙盤設定 Both Side Adjustment(Part4) 兩面調整(第四部份) 14.For fine 14.如需要微調，按 adjustment, touch [反面]或[旋轉/歪斜] i. [Back] - Adjust i.[反面] - 按照影像的 the image 前頁調整背面影像， position of the 以達到一致 back side based ii.[旋轉/歪斜] - 如果 on the image 整個影像順時針或逆 position of front 時針地斜了...
- Page 23 Tray Setting 紙盤設定 Both Side Adjustment(Part5) 兩面調整(第五部份) 18.Measure the misalignment between 18.量度測試圖的背頁[1]至[4]的[+]號和 [+] of [1] to [4] on the [Back Side] 前頁[+]號的差距 and [+] on the [Front Side] of the print chart The figure shows ✓ 圖解是[+]號[1]的例 ✓ 子，每條尺度代表 an example to 0.5mm measure [1].
-
Page 24: Machine Adjustment
Machine Adjustment 機器調整 Gamma and Color Adjustment Gamma和彩色調整 Make this 如果印刷的彩色效果 adjustment when 不理想， 可執行以下 color reproduction 的調整工具以作改善 of the whole output is not good 1.按[調整] 1. Touch 2.按[執行調整操作] [Adjustment] 3.按[Gramma 自動 2. Touch [Execute 調整] Adjust Operation] 4.按[OK] 3. Touch [Gamma 5.等待調整畫面消失... - Page 25 Replenish Paper 補充紙張 Main Tray 主紙盤...
- Page 26 Trimmer Unit 裁切組件 Inner Trimmer Unit 內置裁切組件 Optional Device (TU-510) 另加的配件 (TU-510)
- Page 27 Replenish Paper 補充紙張 Multi-bypass Tray 多用途手動送紙盤 Optional Device (MB-508) 另加的配件 (MB-508)
-
Page 28: Check Meter
Check Meter 檢查計數器 If Digital Doctor not installed, please send 如果沒有安裝數碼醫生,請每月把咪錶報告 the meter report monthly through: 電郵至 bhkg_csmeter@gcp.konicaminolta.com email bhkg_csmeter@gcp.konicaminolta.com 2565-2128 或 傳真至 2565-2128 OR fax Print Counter list 列印計數值 1.按[Utility/Counter] 1. Press[Utility/Counter] 2.按[計數值細節] 2. Touch [Details 3.按[列印模式] Counter] 4.按[Start]列印報告 3. - Page 29 Clean the Charging 清潔帶電極 Corona When it is time to clean the Charging 當影印機需要清潔帶電極時，清潔帶電 Corona, the charging cleaning indicator 極的指示燈會變成黃色 of lights up yellow to notify that the Charging Corona 如打印受到阻礙，代表印表機需要清潔 帶電極，指示燈會變成紅色，文字會變 If printing is interrupted because it is 成黃色 time to clean the Charging Corona, the charging cleaning indicator lights up red and text color changes to yellow...
- Page 30 更換碳粉 Change Toner Cartridge If a toner is near empty，the screen 當某碳粉接近不足時，版面會顯示請更 will show please add toner [Y],[M], 換碳粉[Y],[M],[C]或[K] [C] or [K] 如果沒有使用數碼醫生服務, 請電郵或致 If not join Digital Doctor Service, to 電我們安排送新的碳粉 order new toner, please: email bhkg_csorder@gcp.konicaminolta.com 電郵至 bhkg_csorder@gcp.konicaminolta.com 2565-8181 2565-8181 OR...
- Page 31 更換廢棄碳粉閘 Replacing Waste Toner Box If the waste toner box is full [Please 當廢棄碳粉閘碳粉接近滿時，版面會顯 replace waste toner box] message 示[請更換廢棄碳粉閘]信息 will display 1. 打開廢棄碳粉閘門,然 1. Open the waste 後取出廢棄碳粉閘 toner box door, then draw out the waste 2. 把標籤轉貼到廢棄碳 toner box 粉閘的頂部，把入口...
- Page 32 更換裝訂卡匣 Replacing Staple Cartridge If the staple cartridge is empty, 當裝訂卡匣的訂用完時， 版面會顯示請 replacing staple cartridge message 更裝訂卡匣的信息。請按照屏幕的指示 will display, please follow on-screen 更換 instructions to replace On-Screen Instructions 屏幕指示 1.按[ 1. Touch [ 2. 按[耗材/紙屑] 2. Touch 3. 按[裝訂針補給] [Consumable/ Scrap] 4.按[ ]或[...
-
Page 33: Removing Paper
清理塞紙 Removing Paper 當塞紙發生時，屏幕會顯示塞紙信息和 When a paper misfeed occurs in 指示塞紙的位置 a copy job, the machine displays the message [Mishandled paper] 請按[圖解說明]並跟隨屏幕的指示清理 and misfeed area(s) on the 塞紙 screen Please touch [Illustration] and follow on-screen instructions to remove paper... -
Page 34: Power On/Off
Power On/Off 開關電源 Turn On 電源開啟 1. Turn ON the main power 1. 開啟主電源 switch 2. Turn ON the sub power 2. 開啟副電源 switch * The warm up takes * 預熱時間大約需要6.5分鍾 approximately 6.5 minutes Turn Off 電源關閉 1. 關閉副電源 1. Turn OFF the sub power switch 2. 關閉主電源...