Advertisement
bizhub C4000i/C3300i
[1]
[5]
[6]
[1]
Toner collecting screw
[3]
Transfer belt
[5]
Forward rotation
(8) Transfer belt new article detection
• The transfer belt unit is not provided with any new article detection mechanism. If the transfer belt is replaced with a new one, therefore,
"New Release" must be performed in "Counter / Life" of the Service Mode. For detailed operating procedures, see "New Release".
1.6 2ND TRANSFER SECTION
1.6.1 Configuration
[3]
[1]
Fusing loop sensor (PS10)
[3]
IDC sensor (IDCS)
1.6.2 Drive
[1]
Transfer belt
[3]
2nd transfer roller
1.6.3 Operation
(1) 2nd transfer control
• To transfer the toner image formed on the transfer belt onto the paper, the 2nd transfer voltage supplied from the high voltage unit is
applied to the 2nd transfer roller.
[3]
[2]
[4]
[1]
[1]
[3]
P THEORY OF OPERATION > 1. bizhub C4000i/C3300i
[2]
Backward rotation
[4]
Transfer belt driven roller
[6]
Cleaning blade
[2]
[2]
2nd transfer roller
[]
[2]
[2]
Main motor (M1)
-
-
P-26
Advertisement
