Advertisement
bizhub C4000i/C3300i
[2]
[1]
10. To reinstall, reverse the order of removal.
4.3.6 Machine condition monitor board/Fr (MCMB/Fr)
1. Remove the control panel cover.
F.4.1.6 Control panel cover
[2]
[1]
[2]
4. To reinstall, reverse the order of removal.
4.4 Motors
4.4.1 Main motor (M1)
1. Remove the rear cover.
F.4.1.3 Rear cover
2. Remove the DC power supply.
F.4.3.3 DC power supply (DCPS)
[2]
[3]
[2]
5. To reinstall, reverse the order of removal.
4.4.2 Color motor (M2)
1. Remove the toner filter assy.
E.3.1.8 Replacing the toner filter
2. Remove the rear cover.
F.4.1.3 Rear cover
3. Remove the left cover.
F.4.1.2 Left cover
4. Remove the PWB box.
[1]
[1]
F DISASSEMBLY/REASSEMBLY > 4. bizhub C4000i/C3300i
9. Remove three screws [1], and remove the high voltage unit [2].
2. Unhook the tab [1], and pulled the machine condition monitor board/Fr [2].
3. Disconnect the connector [1], and remove the machine condition monitor
board/Fr [2].
3. Disconnect the connector [1].
4. Remove four screws [2] and remove the main motor [3].
NOTE
▪ When installing the motor, try to insert it straight, and take care not
to damage the gears.
▪ When removing or installing the motor, do not hold the rotor but hold
the plate of the motor or the board.
▪ When installing the motor, use care not to mistake in the kind of the
mounting screws (M3x5 mm).
F-25
Advertisement
