Advertisement
bizhub C4000i/C3300i
[1]
[2]
[3]
[5]
[2]
[1]
[3]
[1]
[2]
[2]
[3]
[5]
[4]
[1]
[4]
10. To reinstall, reverse the order of removal.
2. Hold up the cover [1].
3. Remove the stopper [2] from the groove [3], and remove the cover [1].
4. Remove the screw [1], and remove the cover [2] and cover [3].
[4]
5. Remove the screw [4], and remove the cover [5] and cover [6].
[6]
6. Disconnect the connector [1], and remove the harness from three wire saddles
7. Remove the USB cable from the wire saddle [1].
[3]
8. Remove the USB cable from the harness guide [2], and disconnect the
9. Remove four screws [4], and remove the control panel unit [5].
[2]
F DISASSEMBLY/REASSEMBLY > 4. bizhub C4000i/C3300i
[2] and harness guide [3].
connector [3].
NOTE
▪ Pay attention not to drop the control panel unit.
F-7
Advertisement
