Advertisement
bizhub C4000i/C3300i
▪ At the first time that the main power is turned ON (reboot) after importing the CSRC server information under [Service Mode]
-> [Machine Update Settings] -> [Machine Auto Update Setting] -> [Machine Import Setting].
Set
Unset
8.2 Remote Analysis
8.2.1 Outline
• CSRA (CS Remote Analysis) is a system which analyzes the data retrieved from the MFP for parts replacement prediction, and trouble
diagnosis/prediction.
• Make settings to have the MFP send CSRA analysis data.
[1]
[2]
[4]
[3]
[1]
Command server
[3]
MFP
[5]
Notification of data destination information
[7]
Pre-check server
[9]
Data destination server
<Conducting CSRA settings>
1. The command server notifies the MFP of information related to pre-check server settings and schedule, and conducts CSRA settings
remotely. Alternately, inputs setting details through the control panel.
2. Connection with the pre-check server is checked from [Function Setting] -> [Check Connection].
<Communication flow of analysis data>
1. Following the set schedule, the MFP request the notification of the data destination server information from the pre-check server.
2. The pre-check server checks the data destination server condition, then notifies the MFP of the data destination server, storage location
and data sending timing.
3. According to the information notified from the pre-check server, the MFP sends the analysis data to the data destination server.
8.2.2 Function Setting
Function Setting
• To set whether to enable or disable CSRA connection functions.
• Each setting such as Server Settings will be valid by setting this to "ON."
Setting value
ON
To enable CSRA connection functions.
Disable
To disable CSRA connection functions.
Server Settings
• To make settings for the pre-check server.
Setting item
URL
To set the address of the server.
account
To set an account that is used to access the server.
Password
To set the password that is used to access the server.
Port Number
To set the port number.
Setting value
[5]
[6]
Contents
[7]
[8]
[10]
[9]
[2]
Conducting CSRA settings/setting change remotely
[4]
Request for notification of data destination information
[6]
Sending analysis data
[8]
Sending load condition of data destination server
[10]
CSRA
Contents
Input IP Address
• IPv4 format
FQDN input
• Alphanumeric characters
Alphanumeric characters and
symbols (up to 63 characters)
Alphanumeric characters and
symbols (up to 63 characters)
1 to 65535
I-22
I SERVICE MODE > 8. CS Remote
Default setting
○
Setting value
and symbols (up to 253
characters)
Default setting
○
Default setting
-
-
-
-
80
Advertisement
