Konica Minolta bizhub C4000i Service Manual page 123

bizhub C4000i/C3300i
[1]
[2] [1]
[1]
10.3 Clean unit drive board (CUDB)
1. Remove the clean unit.
F.10.1 Clean unit (CU-202)
2. Remove the UFP filter.
F.10.2 UFP filter
[2]
[1]
[2]
[3] [1]
6. To reinstall, reverse the order of removal.
10.4 Exhaust fan/1 (FM1)
1. Remove the clean unit.
F.10.1 Clean unit (CU-202)
2. Remove the UFP filter.
F.10.2 UFP filter
F DISASSEMBLY/REASSEMBLY > 10. CU-202 (Only for Europe)
5. Remove six screws [1], remove the clean unit cover assy [2].
6. Remove the UFP filter [1].
3. Remove two screws [1], and remove the cover [2].
4. Disconnect two connectors [1], and remove two screws [2].
5. Remove the clean unit drive board [3].
F-46