Advertisement
bizhub C4000i/C3300i
[11]
Direct communication with a mobile device (Wired +
Wireless (Primary Mode), Wired + Wireless (Wi-Fi Direct))
NOTE
▪ To use the upgrade kit, the following settings are required.
[Service Mode] -> [Network Settings] -> [2nd Network Setting]
▪ The "Interface structure" includes the following five patterns. These patterns can be selected depending on the connection
environment of the MFP main body.
[Service Mode] -> [Network Settings] -> [2nd Network Setting]- > [Network Interface Settings]
No.
Network Interface Settings
1
Wired Only
2
Wireless Only
3
Wired+Wireless (Secondary
Mode)
4
Wired+Wireless (Primary Mode)
5
Wired+Wireless (Wi-Fi Direct)
7.2.2 2nd network interface structure
(1) Wired Only
• Use when the machine is connected only to a LAN environment. (Initial setting)
• The LAN line is the main line.
(a) Operation
• To execute a job received from a client via the LAN.
Basic concept of connection
[1]
[2]
[2]
[1]
LAN environment
[3]
MFP main unit (on startup)
(2) Wireless Only
• Use when the machine is connected only to a wireless LAN environment.
• The wireless LAN line is the main line.
(a) Operation
• To execute a job received from a client via the wireless LAN access point.
• To execute a job received from a PC connected to the LAN.
• To execute a job received from a PC connected to the wireless LAN.
• To execute a job received from an Android device or iOS device (called mobile device hereafter) connected to the wireless LAN.
NOTE
▪ A wireless communication is performed between the machine and a client via the wireless LAN access point.
Connection environment of MFP main body
Use when the MFP main body is connected only to a LAN environment.
Use when the MFP main body is connected only to a wireless LAN environment.
Use when the MFP main body is connected to both a LAN environment and a wireless LAN
environment.
• Use when the MFP main body is connected to both a LAN environment and a wireless
LAN environment.
• The MFP main body is used as a wireless LAN access point (Primary Mode).
• Use when the MFP main body is connected to both a LAN environment and a wireless
LAN environment.
• The MFP main body is used as a wireless LAN access point.
• With this mode, a mobile device (excluding iOS) can be connected to Wi-Fi Direct
authentication devices easily.
[3]
P-76
P THEORY OF OPERATION > 7. UK-221
[12]
MFP main body (on startup)
[2]
Job
-
-
Advertisement
