Advertisement
bizhub C4000i/C3300i
10. Select [Service Mode] -> [Billing Setting] -> [License Management].
11. Select [Deactivation] -> [Function Code] or [Deactivation Code], and enter the function code and the deactivation code confirmed at Step9.
<When deactivating with an USB memory>
Connect the USB memory to the USB port on the side of the control panel, and select [Deactivation] -> [USB].
12. Touch [Apply].
13. Write down or print out the serial number and deactivation complete code.
<When deactivating with an USB memory>
MFP will restart automatically. After MFP restarts, write down or print out the serial number and deactivation complete code.
NOTE
▪ When A4S or 8 1/2 x 11S is set to the paper feed tray, the above-mentioned serial number and deactivation complete code
can be printed out by pressing the start key.
▪ Serial number and deactivation complete code can be confirmed in [List] available from [License Management].
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 1. BILLING
J-10
SETTING
Advertisement
