Advertisement
bizhub C4000i/C3300i
2.10 Engine FW DipSW
• To make printer engine settings.
<Procedure>
1. Touch [Engine FW DipSW].
2. Touch the key that corresponds to the switch No. of the function to be set and check the key is highlighted (ON state) in reverse video.
3. Touch [END].
Normal: OFF state
Reverse: ON state
Engine FW DipSW setting list
• The following table shows DIP switches that can be set in this machine.
Switch No.
1
Not used
2
Not used
3
New Release Disable mode
4
Choice of full-speed print prohibited condition detected
5
Enabling high humidity WUP
6
Choice of toner empty recovery mode
7
Not used
8
Not used
9
Not used
10
Not used
11
Choice of fusing rotation while waiting
12
Choice not to conduct image stabilization
13
Choice of securing fusibility
14
Choice of unit simultaneous replacement promotion OFF
15
Not used
16
Not used
17
Not used
18
Not used
19
Not used
20
Not used
21
Not used
22
Choice of main scan direction white line correction
23
Choice of roll belt free rotation
24
Not used
25
Choice of ACS parameter
26
Not used
27
Not used
28
Choice of destination detection disable mode
29
Not used
30
Not used
31
Choice of AT1VC high frequency
J BILLING SETTING/ENHANCED SECURITY/DEBUG SETTINGS > 2. ENHANCED
Function
J-19
SECURITY
Advertisement
